Team-associated RC8.2 User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 54
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
2
:: Introduction
:: KIT Features :: RC8 Platform Features
:: Other Helpful Items
Associated Electrics, Inc.
26021 Commercentre Dr.
Lake Forest, CA 92630
http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · http://bit.ly/AEonFacebook
Customer Service
Tel: 949.544.7500
Fax: 949.544.7501
Thank you for purchasing this Team Associated product. This manual contains instructions and tips for building and maintaining your new RC8.2
Factory Team, 1/8 scale racing buggy. Please take a moment to read through it an familiarize yourself with these steps as they will help you to
understand each component’s function and show you some tips for getting the most out of your RC8.2 Factory Team build experience.
• 3mm Lengthened 7075 hard anodized chassis
• New Stronger A-arms with centerline shock mounts and optimized anti-roll
bar position.
• 16mm Big Bore Hard Anodized Threaded Shocks with 4mm Titanium Nitride
coated shafts
• 7075 Aluminum Low-CG Shock Towers with optimized geometry
• 7075 Aluminum suspension mounts front and rear
• 7075 Aluminum Steering Knuckles
• 7075 Aluminum Axles
• 7075 Aluminum Input Cups
• 7075 Aluminum one piece top plate
• Lightweight spur and diff gears
• Lightweight diff outdrives
• Aluminum steering posts
• CVA Boots on Center and Rear joints
• Dual Heat-Sink brake discs
• New Low-CG wing mount
• JConcepts Illuzion Wing
• JConcepts Illuzion Punisher Body
• 4.30:1 ratio gearboxes
• 43T diff ring and 10T pinion for increased punch and
durability over conventional buggy ratio gearboxes
• Brakes
• Heatsink brake discs included
• Brake cam stops ensure brakes aren’t dragging while on
throttle.
• Blue adjustable brake thumb wheels
• 2 piece Center diff housing split vertically for easy diff
removal and maintenance
• Caster blocks adjust 14, 16, or 18 degrees with molded
inserts
• Low profile elliptical 2-stage air filter
• High Torque capacity 3-shoe aluminum clutch
• PTFE clutch shim and easy to build design
• Adjustable with 0.9mm, 1.0 mm, and 1.1 mm springs
(not included)
• Fuel tank
• Easily removeable fuel tank only 2 body clips for easy
cleaning
• 3.5mm light CVA drivetrain
• Front and rear hubs use large 15 mm x 24 mm bearing
on the inside
• 14 other 8mm x 16 mm rubber sealed bearings
• Rear molded CVA boots to keep dirt and mud out of rear
joints
• Blue Aluminum hexes and nylon locking wheel nuts
Your RC8.2 FT kits comes with the latest components used by our factory race team to win races.
However there are some things that are necessary to complete the build.
• .21 class rear exhaust engine • Muffler, joining pack, or manifold spring (#28045 or #28049 recommended)
• 2 channel radio/transmitter set with switch – FM/PCM/2.4GHz recommended • Transmitter batteries (#302, 303 recommended)
• 4.8-7.4v receiver battery pack
• either flat (#613) or hump (#612) style NiMh battery
• either 1600mAh LiPo (#630), 2100mAh LiPo (#631), or 1700 LiFe (#638) battery (recommended)
• Model car fuel (30% nitro recommended) • Fuel bottle (#1748 recommended)
• Glow igniter (#1738 recommended) • Starter box (#1750 recommended)
• 1/8th scale buggy tires • CA (Cyanoacrylic) glue (#1597 recommended)
• Polycarbonate specific spray paint or polycarbonate specific bottled paint and airbrush
• Thread locking compound (#1596 recommended)
• Needle nose pliers • Hobby knife • Reamer/hole punch • Ride Height Gauge (#1449 recommended)
• Silicone Shock Fluid / Differential Fluid (Refer to catalog for complete listings)
• Body Scissors (AE Part # 1737) • Reamer / Hole Punch • FT Turnbuckle Wrench (#89240) • Hobby Knife
• FT Hex Wrenches (AE Part # 1541, 1655) • Needle Nose Pliers • Multi Tool (AE Part #7494) • Wire Cutters
• FT Nut Drivers (AE Part #1561, 1663-1668) • Calipers or a Precision Ruler • Green Slime shock lube (AE Part # 1105) • Soldering Iron
:: Additional Items Needed
Page view 1
1 2 3 4 5 6 7 ... 53 54

Comments to this Manuals

No comments